Polaroid FLM-323B Television "fuse blows put turn tv" Questions

Ad

... Put new fuse in and plugged it in and it blew. I replaced it with a 4 amp 125 volt fuse. that's what was in it. the fuse blows on your tv because and most likely the tv has a shorted voltage ...

Ad

Question about Televison & Video

1 Answer

...put a higher amp/voltage fuse in the tv and it still work? if you plugged a 125 volt tv in to a 220 volt outlet you more than likely fried alof of the componets in the tv. Putting a bigger fuse in ...

Ad

Question about Televison & Video

1 Answer

...fuse only blows the tv fuse if it is left on standby all the time, replacing the fuse and turning it off every night will prolong the life but won't cure it it is only a temporary fix and in no way ...

Question about Vizio Televison & Video

2 Answers

...fuse. 1) Put tv face down on a flat surface 2) remove legs 3) remove back (there's like 30 screws with 3 different sizes/threadings) 4) right where the power connects up to the big main brown circuit ...

Question about Televison & Video

1 Answer

...you mean the tv's totally dead if so the fuse inside may have blown, if it has make sure you put the same rated one back in, if blows again then you have a short somewhere hope it helps ...

Question about Televison & Video

1 Answer

...blow the fuse and will no longer put out any AC. http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide Failed TV and Monitors: ...

Question about Televison & Video

2 Answers

put no fuse in the box it turns on with the screen black. Hi: This is the X-systain board replace this board and your problem will be solved. The part number can be found on a white sticker some where

Question about Polaroid Televison & Video

1 Answer

fuse) and it blows seconds after it is installed. Any suggestions on what needs to be fixed and is it fixable? Thank you. a power surge can over load the electronics, {cooking them}so most lickely the

Question about Sylvania Televison & Video

1 Answer

...fuse in it instantly blows when i plug the tv in. More likely to be either shorted out bridge rectifier or MOSFET in the primary circuits of the power supply. You need to Ohm out those parts. Parts: ...

Question about Polaroid Televison & Video

1 Answer

...blows the fuse in the tcon board in the middle of the screen back you need to take all boards out and remove the cage mind the cables when doing this. unscrew the 4 screw on the silver case covering ...

Not finding what you are looking for?
Polaroid FLM-323B Television Logo

303 questions posted

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...