Whirlpool LGB6300 Gas Dryer "works heat" Questions

...heat and when put back together it worked and heated then quit heating again. Any idea what else it could be? This very much sounds like a loose connection to the heating element. If it works ...

heat on low temp My dryer works fine on higher temperatures but when set on delicate there doesn't seem to be any heat. It used to work on that setting but now I get the same heat from the air setting

the timer doesn't work. The dryer just runs until the timer doesn't work. The dryer just runs until you turn it off by hand or open the door. is the heat working?when the dryer heats up and then the ...

Hotpoint dryer not heating, dryer tumbles but no heat. check the switch is working then go to the heating coils and check there working ok the next thing to go to is the heat censor inside above the ...

Heat is sporadic. model DDE5900RALWH erial G246248G Heat is sporadic then it cuts off. We normally use the Regular cycle for high heat and regular heat. Then it stopped working. We swithced it to the ...

My motorhomes Eberspacher combitronic heating no longer works on 240v although still heats water and heats on diesel. I have a Eberspracher combitronic fitted to my motorhome. recently the heating ...

wirlpool dryer heating poorly i took the heating element out and ran the dryer and only half of the coils on the element are working,so i replaced the element and still only half of the heating ...

...works but is not heating and i ... kenmore 400 doesn't heat, and timer doesn't move, but dryer ... www.shopyourway.com > Manage My Life > Questions I understand your Kenmore 400 Dryer doesn't heat up ...

...heat works fine. Bottom control panel has some non-working lights. What do I need to do to get it the heat back on? Hi, If you are having problems with your gas dryer not heating the most common ...

Hotpoint Dryer Heat stoped working Hotpoint Dryer Heat stoped working. Once in a wile the vent gets cloged with lint and the heat stops working. after cleanning the vent and letting the machine cool ...