Whirlpool LGB6300 Gas Dryer "door wont close" Questions

...not run. Inside light is on when door is closed inside light on when door is closed??? that sounds like a bad door switch. it doesnt recognize the door shut so it wont start, replace the door ...

on my Bosch WTL 500 dryer Push it closed.. I guess you mean that the door wont stay closed?? If so, the door latch has probably broken. Either the tongue on the door itself or the latch on the cabinet

...on the dryer does not close properly If door wont stay closed it may need a new latch it could be broken or bent.The door could also be bent or the machine not leting it close right.Hope this

...wont come on but light inside stay on all the time even when door close Sounds like your door switch needs to be replaced. When the door is closed it is supposed to shut off power to your light, and ...

...if we dident wiggle it it might not let me close thr door. now its gone and the dryer wont come on at all. what is that part and can I fix it? Thanks so much! Door latch kit. Easy fix. Door latch ...

...wont start. Very frustrating as my clothes are sitting around wet now... Someone please help,.... Sound like the unit doen't know the door is closed the door switch is not working. does the light ...

door, you can hear the timer running but the dryer wont start. not sure what to look for next. HI. if the timer is running, and the wiring harness is in good condition, this will confirm motor failure

...wont start. Checked thermal fuse, door switch and start switch all good. Timer runs but no other noise. make sure door is closed and then if that doesnt do it, open door and look for where the door ...

...is usually held closed with a male and female door catch/latch, the female side will sometimes break internally and wont keep that door closed, or will pop open when the clothes get close to the

...wont turn on acts like the door is not shut but it is Check you r door safety switch. Pop the top and remove the front. Check the switch unplug the power) for contunity first. Make sure it is saying ...