Whirlpool LEB6300 Electric Dryer "heat not turn off" Questions

...turn off or heat? ideas Last week it would not turn off, was still heating and then yesterday I turned it on and now it will not heat..... any ideas? Seems you have 2 problems. 1. Bad thermal fuse ...

...off. I tried to turn the drum and it seems hard. Modern dryers have safety switches that should turn off the heat if there is a problem. The motor may not be working or the drive belt may be

Maytag dryer heating element does not turn off when tumbling stop Older Maytag dryer LDE410, the heating element does not quit heating when the tumbling stops (door opened). Heating element only turns

turn off...will not heat kenmore dryer D433ele will not turn off...will not heat up Hi, If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad.

...turn off and house is getting hot! First determine if in fact the thermo is or is not shutting off. There is usually a little indicator as to when it calls for heat .so how do you know it's the ...

...heat sensor is bad. How many sensors are there? Hi, There can be many reasons why your dryer will not turn... This tip that I wrote will help you to figure out what is happening... Dryer Repair - The ...

...off does the timer turn and keep turning? does it stay put? heat? try using a fluf/no heat cycle for a few minutes to see if it will turn off on its own. if it doesnt turn off then you need a new ...

...heat at all, the likely a heating element has opened up. Unplug dryer from wall (turn off circuit breaker first!). Use a ohm meter to measure and check continuity of the heating elements. There may ...

...The dial on the control panel does not move. When you set the drier to 40 minutes, you come back and it's still on 40 minutes. It will run and heat until you open the door and turn it off. change ...

...heat, but keeps tumbling Kenmore elite dryer (gas) model 11072942100. the gas burner turns on when I turn the dryer on, turns off after three minutes, turns back on for another three minutes, but ...