...flame goes off you see the igniter glows then goes off but no flame,the coils that open the gas valve are working while thier cool but once thedryer gets running,when warm to hot the gas valve coils ...
...flame sensor rarely goes bad if the ignitor is not glowing then thats the problem take an amp reading it shoud be between 2.7 and 3.6 out of that range it will not glow if your not getting a reading ...
...flame. If you are having problems with ignition, the first thing to check would be if your igniter is working or not. Here's some useful information about igniters you should know and understand: TWO ...
flame. This only lasts about a minute or two and then goes out and you get no heat. If you shut it off and wait, turn it back on you get the same results. If you turn it on right away, it doesn't even
...off yet no flame, the problem with your dryer is the gas valve coils The part# for the coil kit is 12001349 using a google search you could find them online for a price range of $ 3.00 way up to ...
...flame sensor that detects the fact that the burner is on and sends a signal to a second solenoid to keep the gas on. It may be hard to tell which is the problem without a meter. My bet would be the ...
flame in the chamber. I replaced them and the issue was resolved. Mine are at the front of the dryer, both have wires leading to them, one being three pronged and the other two pronged. It could be an
37 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions
