Whirlpool LEQ9858P Electric Dryer "work power button held" Questions

...the button as being held on. Try and clean out around and behind the button, even a small squirt of WD 30 may loosen anything behind the button. Make sure the power is off before doing

...has power when start held in I can here timer gizmo working Let go of start button nothing Hi, Sounds like you might have a safty fuse gone bad. Get me the model# and I can help you further. Thanks ...

work unless its held down 110,73952101, the motor will rev when you push start, and it will run when held in but as soon as you let go of the button it stops. Is only the button broken? It sounds like

...button down This is a gas dryer souds like the door switch is broken or malfunctioning . unplug the dryers power cord , locate switch by removing top cover no need to remove switch just yet. locate ...

...power overnite but nothing changed. The sound button is the button that you wish the sound to go on when the load is finished drying. Thanks for the advice, I was worried I just bought them and ...

...power block, slide the panel back into place, replace the front screw and knob, replace the top screw in the back of the panel Did this work? I have the same problem as I just disassembled the front ...

power to the motor and light but not the control panel or vise versa 75% of the time when i work on a issue like this that is what it turns out to be,, take the cover off of the back of the unit where

work at all. The outlet is good (I checked it). All I get is a click in the power control when I push the button. Is this likely the thermal fuse? what's the model number if you have a dryer with even

...work as long as the button is held down. We have done a temporary fix using Gaffa tape (to hold the button down!), but will need to replace the relay at some point as the power does not switch off ...

...work You can chrck the switch by turning the power off and putting a meter accross the switch electrical connectors. When the button is not pushed you should have no continuity. When pushed and held ...