Whirlpool LER4634J Electric Dryer "tumbler heater" Questions

Tumbler not working the machine worked fine until the last load the heater goes on bu the tumbler isn't working belt has broken,what make?do you have a top lint filter or inside one?mike

heater fan to tumbler is not blocked - have seen a sock blocking air flow - drier is only a fan blowing air over a heated element & through a duct or pipe into the tumbler - on exit the air passes

how do i wirea white knight tumbler dryer heater take the back off look for heater and follow wire make up two wires the same colour fit a spade clip to both ends and replace

tumbler wont turn heater and everything still works but tumbler needs a push to start rotateing then i have to quickly shut the door while the tumbler is still going in order to work please help with ...

heater element shows zero volts. Main question: Is there a part on the tumbler motor that can go bad and cause this? The motor has to be running for voltage to exit the motor going to the heater. With

...tumbler spins, the heat won't go on, and the timer on the cotton settings won't run down. The other medium heat settings count down, but won't heat at all. The element works fine and is not damaged. ...

...tumbler spins and we see flame light at bottom of dryer. Vent is clear and not kinked. Filter is clean. But it takes 2-3 60 minute cycles on Normal to dry clothes Did anyone assist you on your heater ...

dryer is 4 years and the heater wont heat up but the tumbler tumbles First check your dryer vent, make sure that it is venting properly. If that doesn't work then it is your dryer heating elements

Tumbler drying not heating up but air blowing through changed heater and thermostat!! Didn't resolve it, what next?? Check High temp cut off safety switch. If it's broke, not connected or? it will not

to run the heater but only 120 volts to run the tumbler. If that's all good, your heating element is bad or you have a high limit fuse that is bad. Hard to know without checking it myself. Good luck..