...stick to keep the dryer on. Is this problem in the starter switch or in the main control panel? this is a motor sw problem . it may be full or lint / when the motor stops the sw / will reset to the ...
...fire if something goes wrong and it all starts to get too hot. Disconnect the power, then open the machine up. Look for the metal duct that directs the hot air into the drum (you'll recognise it by ...
fire. You might have to take apart the dryer to get at the blockage if it is there but try this first. Unplug the dryer. Make sure that it is cool. Pull it away from the wall. Disconnect the vent hose
...reset switch but can't find one. I have also purchased a new heating element and fitted it but still get cold air only. My latest theory is that the last 5 mins of the cycle are for airing, i.e. cool ...
...in or in where you pull the lint filter out then the one of the t-stats will pop and are non resetable.also make sure you have 240 volts going to the dryer,you can check that behind the dryer ...
1,268 questions posted
Usually answered in minutes!
940 Questions
790 Questions
215 Questions
219 Questions