...vent to exit. You have a choice of either an offset lower rear exit, exit from either side, or (when the pedestal isn't used) a bottom exit. With the pedestal, leveling is pretty easy. You remove the ...
...vent hose to make sure its not clogged and I flipped the circuit breakers in my panel to make sure the wasn't the problem. I opened up the back of the dryer, but all I see are a few wires. I don't ...
...vent hose. 3. Loosen and remove all the screws around the perimeter of the rear panel. Remove panel and set aside. 4. The heating circuits will be located on the right hand side (as viewed from the ...
...vent system and found no obstructions, your dryer might have a defective blower wheel or belt. A failure of one or both of these components can restrict air flow in your dryer and take your dryer ...
...bottom of the dryer vent behind your dryer and the outside vent at the opening of the outer vent Remove all air restrictions and clean out the lint chute. I am supposing you have already done so. ...
1,268 questions posted
Usually answered in minutes!
940 Questions
790 Questions
215 Questions
219 Questions