Intermec EasyCoder® PX4i Label Printer "button" Questions

...printer: Turn off the printer, (in the back) then turn on the printer while holding down the Reset button on the top. Release the reset button when the light turns green then wait for the printing

...printer. Turn off the printer, (in the back) then turn on the printer while holding down the Reset button on the top. Release the reset button when the light turns green then wait for the printing

...at the moment Reload back the fingerprint firmware v8.78.1 into the printer.and try to press shift button together with feed

...on a print server then do the following Turn Printer Off Disconnect Data Cable Press & Hold Feed button whilst switching on Keep Holding Feed Button until test label is complete and light has gone ...

...off the printer. 2. Set the DIP switches to reset a portion. 3. Press and hold the Feed/Pause button while turning on the printer. The printer prints out a hardware configuration test label. 4. ...

...intermittent problem, both have hardwired NIC cards. Basically they lock up, pressing any key, menu buttons/feed button gives and audiable beep but nothing else, no feed, no menu, nothing. Then its a ...

PC4 my light it but nothing happens just stays on the red light printer has two litle switches on the back of the opening buttons and if not close properly printer will not work ,switches can be ...

my feed button does not work when I push it, but labels come out and feed by themselves automatically when I scan something, the test labels also worked fine as well You Can Change The Cmos Battery

Intermec EasyCoder PM4i Printer will not print Will it do a test print? Probably something like holding the button whilst turning it on.

...PX4i, how do you reset the printer? I can't do anything on the printer, is not responding to the button. Hello , I you printer displeyed Error Time-out , You need to load the memory card (flash ...