OKI C3400n Laser Printer "toner error chip" Questions

...appear error 615 toner incompatibe you just need to replace the rfid chip with one thats compatible with your machine check the old chip of the old toner and look online amazon alibaba should have ...

...toner sensor error I have a new C5800dn. when I opened it I messed up with the black toner when I tried to install it. I opened it accidentally and spoiled some toner over the drum (outside of the ...

...error message toner low after refill toner This mesage often appears because you refilled the toner. The chip in the toner is sayingthat it is empty, but I can assure you it is full because there is ...

toner sensor error comes on. using offbrand toner. any way to get it working without buying new toner. reset the chip from the cartridge and it will work. i had the same problem as you

Error Message/Black toner empty I have an OKI Data 3400n my friend filled the cartridge and it is still reading Black Toner Empty. What more can I do? Most all new color laser printers employ an RFID ...

...toner but still getting error message Installed new toner and drums but still getting error message Have you replaced the chip? If so try the little cap on the right side of the drum, Remove and ...

...toner sensor error and wont print I have indicated the solution in another post for C3400n. Basically on the right hand side of the drum there is a small rectangular opening of 0.5" x 0.25", ensure ...

Error Message/Black toner empty I have an OKI Data 3400n my friend filled the cartridge and it is still reading Black Toner Empty. What more can I do? I am having the same problem. However I also was ...

...Toner and drum error on my C5500N. I have not had much luck with Okidata support. I have had success replacing the chips in the toner cartridges. The replacement chips can be obtained from ...

...error is telling you that the data from the chip on the toner cartridge is invalid or cannot be read. This may happen for one of the following reasons: 1)The printer is unable to read the data on ...