HP Officejet Pro L7780 All-In-One InkJet Printer "paper alignment" Questions

...paper into the input tray, and then try the alignment again. Press Setup. Press 6 to select Tools. Press 2 to select Align Print Cartridge. The unit prints a print cartridge alignment sheet. Load the ...

...paper the alignment page was printed on The alignment page must be printed on clean plain paper of either letter or A4-size and that has a brightness level (as printed on the paper package) of at ...

paper then nothing un plug machine and re plug - says aligning -error alignment failed This means one of the cartridges is defective, they cant align if they cant print. What i did to fix this problem

printer says insert paper to align ink cartridges my printer (an hp officejet 6500 wireless) will print and works fine except that it always tells me to put paper in the place where the paper goes and

...is started, paper jams and alignment fails. Next, display reads paper too narrow... How do I get out of this loop? Hi you need to aligne your cartridges only with A4 paper If i help you pls vote ...

...no paper-same message Have put cartridges in-same message If align cartridges never goes away, you must replace all ink cartridges for a sucessful alignment.. I'm afraid i;ve never heard of align ...

...alignment failed and then paper too narrow I request you to perform the steps below to align the cartridge: 1. Load letter or A4 unused plain white paper into the input tray. 2. Press Setup. 3. Press ...

...again. If you are having paper alignment issues it could be caused by paper feeding issues. You may need to have your rollers replaced or take your printer in for a cleaning by a certified

...paper, and tried again. Still the same problem. I re-inserted the ink, checked the media sensor cover, powered unit down, tried to skip alignment process entirely by powering down and copying ...

...alignment paper present" help? Hi In order to have a succesfull alignment You need to have good quility of printing Replace and the other cartridge or try cleaning it frmo maintance menu on your ...