Whirlpool 24 in. DU1148XTP Built-in Dishwasher "takes time start" Questions

...time and then the start button a message comes across saying open/close door. After repeating open and closing the door and jiggling the door up and down several times I finally can get it to engage ...

...TIME, Takes a long time to what? If the entire cycle seems to take forever, one suggestion is to make sure your hot water heater is turned up. Most dishwashers requires the water to be a minimum of ...

start button, then nothing Sorry to read about your problem, I hope this helps you out. the blockage, maybe inside the pump of the unit, or at the check valve. I suggest you contact a service company.

...takes long time, 30 min cycle takes about 3 hours since the water drain is on a float be sure there is no blockage of the screen drain area in the bottem of the dishwasher under the lower rack.the ...

takes standing there and pressing it 20 times before it starts - other times it starts on the first try. any ideas? No personal experience with this machine, but two things come immediately to mind: 1

Mains RCD blows after a few minutes of operation The 1st time it happened the dishwasher seemed to be taking a long time to finish and then it stopped altogether. We found that the mains RCD had blown

...start under your sink with the drain hose,air gap or disposer.thats where i have found blockages most of the time.after cleaning inspecting their ,then work your way back following that hose and ...

very noisy wash cycle my dishwasher suddenly started to make a lot of noise while washing (loud humming noise) most times i have found a foriegn object in the pump. sometimes the machine will clear it

Dishwasher is noisey when the pump is starts to pump water around I own a Jenn Air JDB-5 dishwasher and it is bout 2 years old. The dishwasher has worked flawlessly until now. The unit will fill with ...

time the start button indicates a fault. I have tried holding down the on button so as to stop the start button flashing so that I could select a program - this did work once and I selected my program