...open/door close' check if its dirty or stuck if mechanical. press door to close and hold tight close while starting to identify.- or no sufficient water supply- or used water cannot drain ...
Question about Kenmore Dishwashers
door when you close it). To clear the flashing light you will have to reset the console. Do this by closing the door and press these buttons in sequence... -high temp wash -heated dry -high temp wash
Question about Kenmore Dishwashers
...wiring). It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close
Question about KitchenAid Dishwashers
door, close the latch and select a cycle and depress the switch. Note that if the test is successful, with the door open, the dishwasher will operate and water may spray out. Make sure to first remove
...door close anymore. Push on the door when the lights flash and see if this stops the blinking and continues with wash cycle. If it does, there is either somehing interfering withe the door closing ...
Question about Kenmore Dishwashers
...wiring). It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close
Question about Maytag Dishwashers
...door won't close. The lights are flashing Performa dishwasher. Lock is stuck and the door won't close. lights are flashing. Disconect fuse at breaker pannel. Then with a plastic dowel or blade trip ...
years old) have a weakness in the door switch/latch assembly, and that would cause the light to flash - it wants you to press Start and close the door, but it's not recognizing that the door is closed
...properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close it). Please do rate the solution and revert for further assistance. Thanks ...
...wiring). It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close
62 questions posted
Usually answered in minutes!
915 Questions
493 Questions
219 Questions
129 Questions
99 Questions