Whirlpool GU2400XTP Built-in Dishwasher > Search
Whirlpool GU2400XTP Built-in Dishwasher element
and it would start blinking again when I started it. Then it wouldn't do anything. Based on research, I decided to replace the heating element and that solved the problem. Of course, now a year later, I am having other problems. more...
on a wash it gets stuck, as if the controller is faulty, then i realised that it is not heating up either, could the element cause the controller to stick (say in a position where the machine is supposed to heat up and stay there as it isnt heating more...
the water to reach the temperature. In your case it look like the water isn't being heated (because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues.
Another possible is that the timer unit is defective (this is more...
It could be that a deffective heating element will prevent controller's advance. In case of a deffective heating element the water will not be warmed to needed temp and more...
gained by just looking underneath, some have a plastic removable base so access is gained still by the underneath, if no problems with the element there could be a supply fault to the element, it has been known for wires to become broken inside the door near the hinge more...
as a normal rule dishwashers inly use cold water to fill and then warms it up, look for a faulty heater element, test with a multimeter
work with safety and unplug when working on appliances
if i have helped please rate me sorry i should have said the more...
wire enters the cabinet / very common fault and very cheap to fix.
otherwise check all individual parts one at a time, start with heater element, then pump, the motor, unplug to test, if it doesn't trip while unplugged the you have the right thing, replace part as needed
need more more...
Back to Whirlpool GU2400XTP Built-in... page.
Sponsored Links
= Poor
= Average
= Good
= Excellent
