Dell Latitude C400 Notebook "setup" Questions

...boot up the new system i get the following message: No Bootable Devices-strike F1 To Reboot F2 For Setup you haven't set your bios and or your setup to read the new device ok so go to the bios f11

Access BIOS setup from XP? I see the text "Setup" on my F1 key, and I read this can be used to access the setup utility in Windows XP, but, it doesn't do anything. What should I do to get this ...

...when the numeric keypad is enabled. Turn NumLk off by toggling the key. You can change it in System Setup. Under Post Behavior heading. Press to enter System Setup and make changes to user-definable ...

tell me how to enable dell latitude d600 setup password go to setup when booting usually del key or f key in bios you will see security section you can add passwords for booting and to enter windows

... DST Log contains previous errors. Thoses errors are stored in the Bios. Look for an option in BIOS Setup to clear the error log, or try turning error reporting off in BIOS setup, then reboot and ...

how to clear momory from setup screen how do i clear memory out The setup screen has no way of clearing the computer memory.  The setup  screen will allow you to change things as far as ...

need hard drive password You need to go to CMOS setup or BIOS setup. Follow these steps: 1. After pressing the power button of your Laptop, press F2 key until it display the CMOS setup menu. 2. Select

setup password remover Cant change settings in the setup mode with the password on. by pass it in safe-mode ,then you can change the password

My laptop will boot dos, but will not boot windows. I can run setup utility, but after i exit setup, it will not boot windows XP. Hello sir.your windows is bad.Please format your PC using win XP2

When booting up get message "Invalid Configuration Information Please Run Setup program". Do not know how to start Setup program Soon As It Starts Press F8 F8 F8 F8 F8 That Should Get You In