Question about Amana Washing Machines
...shift actuator Amana washer worked 3 loads then quit again. not agitating right and not spinning. why would the new shifter stop working again? fills and drains OK. The replacement shift actuator may ...
Question about Maytag Washing Machines
...replaced. If so, most problems I have found from that model comes from shift actuator under machine that shifts transmission from agitate to spin. Also be sure drain Pump is working and pumping
Question about Washing Machines
www.repairclinic.com/PartDetail/Shift-Actuator/W10006355/1719787?modelNumber=WTW4800XQ2?RCAID=1000057 You need to lay the machine down after draining it by hand and then remove the part and replace it
shift actuator with a multimeter i tried to run a diagnostic test and the wash cycle and drain cycle worked well but the spin cycle would not work at all,just go a loud noise, and the lid lock flashed
...spin. In the spin cycle the machine agitates, the drum rotates slowly wrapping the clothes around the agitator, the pump works OK. The shift actuator in the gearcase is bad. Replace the
what does the shift actuator do in a washing machine Where did you run across this term?
Question about Washing Machines
...machine back for access to connectors for motor, capacitor, shift actuator and pump. You might want to pull the pump and make sure nothing is caught in there. Also do the connectors at the control ...
Question about Whirlpool Washing Machines
machine. No matter which wash cycle you choose, after putting the laundry in, it locks the lid, senses the laundry, proceeds to "wash", (sometimes) fills with wat er and then stops and unlocks the lid
Question about Maytag Washing Machines
Shift Actuator cause the belt to fall off & pulley to come loose? Hi, the error relates to a motorspeed sensing error. I would advise you to get the washer serviced via maytag since there are multiple
Question about Whirlpool Washing Machines
...not spin then odds are the actuator is not shifting it from wash to spin or the main board is sending the signal to the actuator to tell it to shift. My top load Whirlpool washer won spin how do fix ...
146 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions