...must be balanced inside the drum in order to stop the violent shaking. Unlike a front loader, the top loaders must be balanced before starting the load. If you need more assistance, let me
Question about Washing Machines
...the balance spots themselves. The best washing is done with a medium load so that the the washing is picked up and dropped from the top of the drum (front loader), not so critical with a top
...front loader drum vibrating quite loudly. Feet are level. Any suggestions. Check the 3 transit bolts on the backside of the machine. Should be removed. Could also be a problem with the balancing ...
Question about Frigidaire Washing Machines
...front loader loud, screeching noise Hi - Try to rotate the drum when it is not in use, manually and see if you notice the sound as well. If you do the drum is not balanced and you would need a ...
loader which is experiencing excessive vibration. The machine had been serviced from a sears tech who balanced the drum as the machine was balanced. The excessive vibration stopped and as a result the
...front loader.If your machine is a top loader which I think it is then the problem could be your brake arm or spin coil is not operating.Please reply and let me know if the clothes are tangling around ...
Question about Electrolux Washing Machines
front loader got out of balance now wont reset. is there a reset button washer model # FWTBB30DS0 There is not a reset button, rather you must unplug or turn the circuit breaker off to the unit for 10
Question about Electrolux Washing Machines
...front loader. Justput it on the 18 min quick cycle and when spinning it was bouncing every where? There are shipping anchors that hold the drum steady when it is being moved. IF you don't take those ...
water sounds drum sounds like drum has water in it still when cycle is done This Liquid in the drum to balance it on spin, all Maytag front loader have it.
Question about KitchenAid Washing Machines
...front loader washer then the springs holding the drum in place (inside the washer) are weak and off balance or the bearings are damaged. Need some detailed mechanical check. See this post on this ...
146 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions