...2 speed - 10 cycle Mod. LW8413W2 Mfg. No. PLW8413W2A S/N R-9504056772 Occasionaly,At the end of a wash cycle it will continue on to the next cycle and run the next cycle. my heavy duty 7 speed motor ...
Question about Whirlpool Washing Machines
...2 speed 7 cycle washer machine stopped working, It fills up and aggitates for the first cycle then when it should drain and spin it doesnt drain nor spin It's most likely the lid interlock switch. ...
Question about Roper Washing Machines
...cycle 2 speed washer: it works well until it gets to the rinse cycle going into to spin. It totally stops working for about 30 minutes and then will finish cycle The cycle timer may be "hanging" or ...
Question about Admiral Washing Machines
...CYCLE. IT'S AN ADMIRAL HEAVY DUTY 20 LB/ 2 SPEED gIANT cAPACITY plus purchased around 1989 Nice old style machine. I think the motor has a two speed control on those. Low speed does wash and high ...
...cycle commercial heavy duty super capacity washer with 2 speed motor. It won't change cycles...from agitate to drain, rinse, spin without having to do it manually. How can I fix this? Look at ...
Question about Roper Washing Machines
...cycle 2 speed washer: it works well until it gets to the rinse cycle going into to spin. It totally stops working for about 30 minutes and then will finish cycle Sounds like timer circuit. Roper ...
...2 Speed Motor 12 Cycle Stops when it gets to the rinse cycle. What could be the possible things that can cause this to happen? That sounds like a failed mechanical timer. Replacing that should solve ...
Question about Admiral Washing Machines
...Capacity Plus 2 speed combo 8 cycles? Water going into the washer but all of the water is just coming back out of the black hose in back, why is that? CAN U MANUALLY MOVE THE CYCLE TO WASH OR
2 speed heavy duty. debra, I would run a hot water cycle without cloths, add clorex -clorine and a little detergent to the water. After the cycle fully runs, leave the lid open for few hours. It might
...2 speed 10 cycle washer. Spin cycle OK but when motor reverses for agitator cycle, pulley at base of transmission will only rotate part way before hitting a hard stop and stalling motor. Suspect ...
146 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions
