front load washer, the load shifts and the drum starts banging. I have tried washing one to four towel at one time. I have changed the spin speed from high to medium and I still have the same problem.
...change the springs - both the leveling and suspension. You may also need to change a few other parts on the brake and drive tube including the thrust ring. But replace the springs and let see what ...
...front panel should drop and pull out. You can see if any of the suspension sprins broke. The drive block is located under the basket. The agitator and basket have to be removed to change it out. Take ...
...front at the bottom you can remove to have a look. Otherwise you need to tip the washer on it's back to get a good view to see the springs. It is so common that the washing machine can make ...
Question about Washing Machines
front panel or the rear panel to access them. When shock absorbers weaken or become damaged, the machine will often make a loud banging sound during the spin cycle and if the symptom is not corrected,
...change the belt. If the motor isn't running, the lid switch may be defective. If so, the washing machine can't spin and may not function at all. The switch is inside the washing machine main housing ...
...springs (2) as well by removing the top of the washer...this is what to look for to insure they aren't broke... If all that checks out then unfortunately the tub bearing is likely worn, or the inner ...
Question about Whirlpool Washing Machines
...suspension has to be inspected. Since these fittings are located on the underside of the machine it is important that you look for the noise with a good inspection lamp. Manually turn the motor and ...
...concrete balance weight., or suspension spring unhooked or broken.. Not draining properly ,check filter if there is one usually at front behind removable cover at bottom. Plz rate my solution.
146 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions