HP ProLiant ML370 G4 Server "raid 0 array" Questions

...RAID 1+0 - Drive Mirroring} and the remaining 3 as RAID 5 (Drive E:). Problem: The first array C drive is running extremely low on Hard disk space i.e it only has 255MB left. Solution Required: To ...

...RAID 5 (drive D:). suddenly i lost D: drive and upon checking it says the logical drives are disabled because of a problem. rebooting produces the following message: 779 - Slot 0 Drive Array - ...

...0 HP smart array E200i Cintroller Intializing ....." How do i resolve this problem Reseat the drives, but DO NOT swap slots. Keep exact, in case of RAID configuration.Use the Smartstart disc. It ...

RAID 5 config, now out of 5 drives it says 'OK' for 3 drives on 0, 1 & 2 and for 3 & 4 it says 'Replacement'. Is there any way of finding the correct Logical sequence of the drives. Also if we

...RAID-0 RAID 0 will fail with a single drive loss. So if you lost a drive, you lost the array, and most likely your datas. It should never be used in a production environment, because it can not be ...

...0. This was originally raid 1 with disk 1. The array was inadvertently broken and now the original disk is no longer available as a raid member (greyed out in array builder) How do I get it back? If ...

RAID 0 array OR you've lost a lethal combination of drives in a RAID 10 array. Any way you slice it you will have to replace the failed drives and restore the data from a backup. The only other "safe"

...a 2600 doesn't support RAID 4. You can do RAID 0, RAID 1 and RAID 5. With 3 HDD's your best bet would be a RAID 5. Mirroring is RAID 1 (which would only use 2 of the drives) Ctrl M during power up

Following arrays have missing required members and cnnot be configured: Array#1-RAID-0 ? how to recover data form hare. You lost the array. Data can only restored from backup.

...has failed. I would replace this first as RAID controllers are less expensive than replacing the system board, or the server as a whole. Suggested: PERC 5i (RAID 0/1/5) or PERC 5iR (RAID 1 or 0