HP Compaq ProLiant DL380 G4 Server "power pc booting" Questions

...power cut our ProLiant DL 380 , can't boot , displaying the following messages : - "the standard boot order (IPL) has been reset to the system default" - "please run the Rom Based Setup Utility to ...

...the hard drive on another pc ( just to find out if it is the mainboard or harddrive that`s failing ) The problem could also be the power supply. Check also the bios settings, for boot order. Good ...

PC wont boot up after power cut Hi I have a pc with an ASUS M2A-VM motherboard running XP Pro 64 bit with AMD quad core processor. I know little about pc's but have used safe mode etc Anyway, the ...

PC); 3. used another (WIFI) PCI card to test HP motherboard PCI slot as thought it was faulty - but it went fine! so server booted up with wifi card. 4. bought another PCMCIA>PCI card! Different brand

...PC on the same network to access this system (like a remote control via VNC or RDP) even if it won't power up--literally. Inside the ILO page, (you'll need the IP address of the ILO, the default ...

...power up you computer and press the "f10" key and in some computer it can be the "delete" key.some pcs may require you to press the keys continuously. It will lead you to the "bios" configuration. 2. ...

...PC back on and test. Unplug the power supply from the mother board and plug it onto power socket by itself without having anything connected to it and see if it runs okay on it's own. If not it's ...

...power supply can cause shut down (had the same thing happen to my pc 2 mos ago.) Try a different supply of at least the same wattage rating. If you are still having the same problem, you could be ...

...PC-2700 RAM. There are no hard drives installed, but all I want is to get into the BIOS. I get no video in this configuration. Help! try first with one cpu and only one stick of memory in socket zero ...

...A successful connection over this will show readable text a few seconds/minutes after powering up the