clunking/grinding noise during any agitating and spinning during a cycle. Only had the capacitor replaced today (04/06/10) because it stopped spinning all together. Now the capacitor has been fixed it
Question about Kenmore Washing Machines
clunking can be caused by a number of things, In this case though, first check the bearings at the back of the drum, if the drum is wet and theres a grinding noise major fix. check the concrete blocks
...clunking noise &so does dryer when moving around, you can turn the basket by hand to make it clunk. Hi, Here is a tip that I wrote about dryers and noises... It will help you determine what is ...
Question about Whirlpool Washing Machines
My Maytag MAH3000 washer has intermittent grinding noise when the tub is turning during the fill cycle. Once in awhile, the grinding will continue into the wash cycle, but the noise doesn't occur with
Question about Frigidaire Washing Machines
...machine makes a loud clunking noise in wash and spin cycles..it sounds like it is off balance...my machine is now about 4.5 years old......how much would it cost to repair and what does it need to be ...
making clunking noise when washing an grinding noise when spinning If it is more then 5 years old, most likly the transmision, parts are high, within $150 of buying a new one.
Question about Whirlpool Washing Machines
...grinding sound. It is a repeated clunking sound even with a very small load. Some water also leaks from undernea the the washer. The top of the tub appears level before I start the washer, so the ...
...clunking noise when it is spinning in high speed. Only happens on normal wash cycle, not on perma pressed. Any ideas?? Wayne see if the shocks are not broken. if you spin the wash basket by hand and ...
Question about Maytag Washing Machines
...clunking grinding sound in the middle of the spin cycle. As I mentioned the grinding sound comes during the spin cycle, the drum turns now but does not spin at full speed and when it does try to spin ...
...clunking, grinding noise during spin cycle. My guess is coupler, lid switch and timer are OK. What could it be? If it agitates fine , with normal noise , drains with lid closed , then the problem is ...
66 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions