Whirlpool LSR8433K Top Load Washer "maytag lid activate agitation" Questions

maytag performa stops during agitate or spin sometimes washer will stop when trying to agitate or spin. motor seems fine with belt off but tub feels like its locked up All washers have a safety switch

...Maytag washer lid switch works. The lid switch is located on the controls panel, and is activated by opening and closing the washer door. The purpose of the lid switch is to prevent the washer from ...

machine will not agitate. could it be the water level switch. I replaced a new lid switch. Do I have to replace the timer?. make sure the lid switch is being activated. you can raise the lid a little ...

Washing machine fills in water but agitator will not start or activate Sounds like the lid switch is bad, replace it

...maytag washing machine. When I close the lid it doesn't always start agitating. It seems that slamming the lid will get it to start, maybe it is just repeated openning and closing that finally ...

...agitation is controlled by the drive motor and gearcase (transmission). The washer will still spin and agitate with worn dogs on the cam assembly, but the agitiator will slip or remain stationary. ...

...maytag top loading washer from a friend. Not sure model/age. It ran one load of clothes without problem. We put another set in, and the washer filled up with water, but didn't agitate, and ...

lid was not open the washer is display that the lid was not open for the last 3 wash I am not an expert, but usually anything to do with the lid involves a part that pushes down on a button where the ...

fills and drains but dosen't aggitate, spin. the water does drain out though Check the lid switch it may not be activating the machine to agitate or spin after if fills with water.

...in. Still nothing works. Any ideas? Is there a switch for the lid? If so, stick a pencil in it, sometimes they wear out and the little pin on the door does not push them down enough to activate