...Check if there is any water causing the styrofoam to float and keep the switch up. Dry out any water there. Replace the cap and the front panel. Try your washer again. I hope this helps. Cindy ...
...styrofoam float so the limit switch is not tripped. The machine will run but there is water weeping from the rear of the drum where the bearing and seal are. What is the difficulty and cost of ...
...the bottom near the front. This must be the "AquaStop". The mechanism contains a bit of styrofoam that floats up on any little amount of water that collects under it and triggers the ...
...float some of them if . . . you allow a partial fill, then pull the plug. One catch; it is possible that you cannot open the door with the plug pulled. It wouldn't be illogical that the maker would ...
180 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions