Whirlpool LSB6200PQ Top Load Washer "rust side" Questions

Ad

...rust is not covered under the warranty and in most cases, the door will more than likely need replacing. Could you please provide me with your model number? You can normally locate your serial tag ...

Ad

Question about Whirlpool Washing Machines

1 Answer

...side while lifting up as there are 2- 1" wide catches). Once both sides are unlatched, raise the lid then slightly lift the rear of the lid so that it fits into the curved part at the top of the ...

Ad

Question about Estate Washing Machines

1 Answer

Cold water intake rusted the cold water intake going into the cold in the washer is rusted. Water comes out to slow. I have ended up putting the cold through the hot water side that's not rusted to do

Question about Kenmore Washing Machines

1 Answer

rust on the side due to leaks. I am afraid of an electrical short from this leakage. And so you should be. Anyone who continues to use an appliance around uncontained water is inviting electrocution..

Question about Kenmore Washing Machines

1 Answer

Spring rusted off. How do I replace it? Spring rusted off. How do I replace it? Make sure that where the spring attaches to the bottom of the tub mount, is not rusted into also. If it's not replace ...

Question about Whirlpool Washing Machines

1 Answer

lid hinge pin rusted Pin that goes from lid into washer is rusted into the washer. Pin is broken on that side and the lid is only held in the right side of the washer. Can the pin be purchased? Yes ...

what caused the left side of the cabinet to rust? We need more information on the make and model number as well as whether the rust is inside or outside and also the location that it is installed in.

Question about Whirlpool Washing Machines

1 Answer

rust??? you will probaly need serviceman..the parts that control the plate in the bottom are starting to corrode and accumilate gunk that is coming back off on clothes replacing them only fix also may

Question about Whirlpool Washing Machines

1 Answer

rust. If the unit still under warranty, contact the manufacturer for assistance on repairs. If the appliance is out of warranty and you are a handyman (That works with safety), you may try a repair as

Question about Whirlpool Washing Machines

1 Answer

...rust was visable. I even layed the washer on it side to see the guts of the machine and see if any rust was growing. Everything looked good. Am I missing anything? No depending on your citys growth ...

Not finding what you are looking for?
Whirlpool LSB6200PQ Top Load Washer Logo

43 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...