Whirlpool LSR5132PQ Top Load Washer "remove balance ring" Questions

...remove the housing of the washer. it is a simple fix. should be below $20 to get the clips, j ...

...liquid balance ring on the tumbler front if it sounds like running water when you turn the tub, it means your balance ring is working' it is there to keep the machine balanced and is sealed in the ...

...balance remove the frame of the washer,look at the back bottom of the frame,there's a spring that is connected to the bottom of the frame and hooks the the back of the tub,sometimes the frame rusts ...

...balance? Their could be objects between the tubs, remove the inner tub nut under the agitation device and lift out the tub. look for objects in there. Also the inner basket has a balance ring in it. ...

...remove. 1.) The counter balance spring is located in the bottom rear. It should be attached between the cabinet and a bracket on the tub. 2.) Inspect snubber and corner pads. May be brown or white in ...

...balance ring that may have came loose or is broken. Remove the top by unscrewing the 2 screws from the top electrical area of the washer, then remove the 2 clips with a flat head screwdriver. Unplug ...

...remove the case to get to the balance ring go to www.sears.com and go to parts and put in the full model number, under the parts tab in appliances and select view brakedown and it will explain it ...

...balance problem goes away. I think it's the snubber ring, but I could be wrong. I have a agitator and the outer backet off. Here is my question... How do you get the seal nut assembly off? I have ...

...remove lint and other fabric debris from the pump/drain hose. I still hear water slushing around when I spin the drum. To get to the source, I was able to disassemble the door, front panel, lid, etc. ...

...balance ring, some machine use cement others water. you say the washer is unbalanced even when empty, is there an indicator or is the machine itself physically off balance. if there is an indicator ...