Brother DCP 115C All-In-One InkJet Printer "keys keypad print screen" Questions

keypad. Follow this: 1. press buttons Set, Menu, Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds. 2. enter maintenance

...keypad should be as follows: 1. press buttons OK, Menu, Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds. 2. enter ...

...keypad should be as follows: 1. press buttons OK, Menu, Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds. 2. enter ...

...keypad.. there is an error on startup which is, uanble to clean 46. so how can i reset the purge counter... come on guyz, and gals... pls revive my printer... thanks! press the menu and mono start ...

...print remove the power cable from the printer (or turn the printer off if you have a fixed power cable). Hold down MENU/SET/START and re-insert the power cable/turn it back on. Keep the button held ...

keypad. - Machine off - Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode. - press 80 - press the “mono start” button

keypad. - Machine off - Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode. - press 80 - press the “mono start” button

keypad. - Machine off - Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode. - press 80 - press the “mono start” button

keypad. - Machine off - Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode. - press 80 - press the “mono start” button

those keys. 5. Follow on printer screen instructions. For Box-type models: 1. Unplug the power cord from the printer. 2. Wait for 30 seconds. 3. Plug the power cable back in the printer and turn it on