Question about Brother HL Office Equipment & Supplies
...drum and find the blue tab on top, run it back and forth about 20 times to clean the corona wire. When that doesn't help you open the door and hold the go button til all lights flash and then close ...
...(drum and toner) On the top right there is a tab that you need to slide from left to right about 20 times, then bring back to home position brothe hl2140 laser printer drum life end reset ...
Question about Brother HL Office Equipment & Supplies
...drum a month ago. I cannot use the printer because this message keeps popping up! You run the little blue tab back and forth about 20 times, use a can of air to blow toner out of that area, if it ...
Question about Brother HL Office Equipment & Supplies
...it most likely will be to clean the drum which you do by moving that little blue lever on the drum back and forth around 20 times. If it's a paper feed error, clean the feed roller with a damp
Question about Brother HL Office Equipment & Supplies
If it says clean the drum, you need to run that blue tab on the drum back and forth about 20 times. It also helps to blow out that area where the blue tab is with canned air. Check the toner cartridge
Question about Brother HL Office Equipment & Supplies
...the last errors, sometimes you need to run the blue tab on the drum back and forth about 20 times and blow out the area below the opening for that tab with a can of air. Usually solves that
...drum and turn back on. After hours of working on one of the printers, virtually taking the entire thing apart and replacing fusers, toners and drums, I accidently stumbled onto this sequence. When I ...
Question about Brother HL Office Equipment & Supplies
...drum and error light but i still can't print http://mycomputerbytes.wordpress.com/2011/11/16/reset-brother-hl-2170w-network-settings/ If printing via network and you have not set a static (meaning it ...
...drum, replace the cartridge and both errors should clear. A dirty drum will also trigger your 1st error e020. Hello, I have error code 20-0293 and 20-0486, could you let me know how to fix, please. ...
...drum, run the little blue tab on top back and forth about 20 times, blow out the area below the blue tab, and re install and try printing again. If the error is drum life end you need to open the ...
111 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions