Brother DCP-340CW All-In-One InkJet Printer "fix unable print 4f message" Questions

print unable message in a Brother inkjet usually means the waste ink chamber is full. This can be fixed by removing the waste bottle, cleaning and drying the pads inside, then reassembling the machine

unable to print error message 46- nothing at Brother. they want you to take everything to a repair shop.they don't help at all. Then the error went to 4F when I tried toclear the memory.As Iunderstand

...printhead and in 99,9% the head has to be changed and cant be fixed!) Hi, I have brother MFC 240C printer gives Print Unable 4F message, is it possible fix to fix it or throw printer in recycle

...fix Error message ..Unable to init.4F ? Message comes up after turning on. Sorry... Print head damaged. There is an very low possibility to erase the error without buying new print head, but it's ...

...unable to print 4F"? Please advise if you can help? From the Brother service site, 4F is a code that refers to a failure or service center repair to the print head. Below is the line from their ...

...fix it? help. My MFC 665CW popped this same "Unable To Print 4F" error recently making the machine fully useless. Just an annoying triple beep and repeat error message to screen when trying to do ...

...your printhead is crashed and cant be fixed. If there is another code than the above please write here again! i can not print any documents it keeps coming up as Init unable 4f please help ? i ...

unable - 4f". can you tell me what is wrong and how to fix? Hi there Please try this. With some Brother printers you can try this. Access the internal maintenance mode by pressing the Menu/Set button,

...Unable to Print" message and the error code is 4F. Could you help me with this problem? Thank you. rendilo, sorry , no good news: The printhead or purgeunit is in disorder. The whole unit has to be ...

...unable to Print 4F" Code on "unable to Print 4F" Code on screen. This if for a MFC210, but give it a shot: Access the INTERNAL MAINTENANCE mode by pressing the Menu/Set button, then press * ...