Question about Brother Office Equipment & Supplies
...is full...What do I do? The unit has to be dis-assembled and the ink absorber (like a felt blotter) has to be cleaned or replaced. After re-assembly, service software is used to reset the ink
Question about Brother Office Equipment & Supplies
...ink absorber is full on my canonip2000. how do I fix this Dis-asemble the printerr. Find the blotter felt absorber. Replace it or spend a lot of time rinsing it out till it becomes a light grey color ...
Question about Brother Office Equipment & Supplies
...blotter under a stream of running water as it flushes the waste ink out. This will take a long time - maybe 10-15 minutes for each one. No, you will never get them white again, but your goal is to ...
Question about Canon Office Equipment & Supplies
...ink absorber is a blotter/felt pad inside the printer. It requires dis-assembly of the printer and is often on the bottom near or under where the cartridges are parked for cleaning.. You either have ...
...blotter paper quality,, this will use less ink flow and less likely to bleed This may sound stupid but are you printing on the correct side? Sorry for this but that is all I can think of besides ...
...ink absorber* almost full. The printer has a built-in waste ink absorber to hold the ink consumed during Print Head cleaning. Eight flashes indicates that this absorber is nearly full. Press the R R ...
...ink blotter... Disassemble the unit take it out and rinse, rinse, rinse till it is a very light grey and dry thoroughly and re-assemble. It may take an hour to adequately rinse the ink out, but ...
...blotter that absorbs the waste ink and THEN download and run the Epson printer service software. Search google for "Epson service software" Here is a link to one of them: ...
Question about Canon Office Equipment & Supplies
...it is almost white and then use special software to reset the counter in the printer. Look up maintenance software for your printer. One has to disassemble the printer to get at the waste ink
...to do The ink blotter in the base of the machine is full, it needs to be completely stripped to replace this. It is a built-in redundancy. The machine is a write-off. Buy another brand. Brother
86 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions
