Samsung SpinPoint V60 SV0813H 80 GB ATA-100 Hard Drive "jumper setting ata" Questions

...won't boot when sv8004h is connected on as a secondary drive on the primary ide cable Check the jumpers (Little connector which connects two pins together) at the back of the drive, your second ...

Master jumper settings for sv1204h i'll try to explain with a scheme: :::: These are the pins, you need to put the jumper like this: [:]:::

i dont know were will i put the jumper to turn my hdd on master I can tell you where to put it, but your probably better off to go online and search for SAMSUNG JUMPER SETTINGS. They will show you a ...

...Setting.html this link will demonstrate all the jumper settings you should need. If you have any trouble figuring out which ones to use, drop me a reply on this answer and I can help you sort out any ...

...jumper setting when used alone, while others need to be set as master even if there is no slave drive present. The jumper settings are usually marked on the drive, or you can check at Samsung's ...

...jumper setting for model 6v200e0 Need to know maxtor hard drive jumper setting for model 6v200e0 (Serial ATA) here is a poster of Maxtors jumper settings for each kind of drive. Serial ATA drives ...

...jumper setting to slow down your SATA drive's transfer rate, please see Document ID: 193775. - -- (Click to expand) Jumper settings for Seagate SATA drives - -- (Click to ...

...2nd drive...need to change from master to slave on pin settings... hi frined remove your hard disk jumper & u r hard will be slave PLACETHE JUMPER IN THE MASTER AT FIRST POSITION AND REMOVE ALL ...

which is the correct jumper settings on Seagate Barracuda ATA IV 80 GB Hard Drive Hello Please see the image below for correct jumper setting Hope this helps, if so do rate the solution

jumper settings for Maxtor ATA Hard Drives Thank you for purchasing your new ATA hard drive from Other World Computing! Please review these jumper settings prior to installing your new hard drive into