Reconnect the lid locks wiring harness and push the top cover back into the cabinet until the latches lock up.Please let me know if the problem comes back for further troubleshooting and repair guide
...lock andat machine control board.• Push lid closed to make sure nothing from inside ispressing against it which may keep it from unlocking.• If necessary, remove clothes by disconnecting powerto ...
...door lock assembly You disconnect the power ,take the top cover off, then you see the door lock assembly so take the screws from the front door ,you hold the door lock assembly and install the new ...
Question about Whirlpool Washing Machines
...cover to expose the door lock assembly. Prop up the top cover to prevent it from falling back into position while accessing the door lock assembly. Disconnect the wiring harnesses from the door lock ...
Switch unit. - Door Lock/Switch unit Failure First disconnect the machine power cable from the wall socket. You should remove machine's top cover and then you will have an access to the door lock unit
...lock to the top cover. Release the lid locks from the lid then reinstall them back into the top cover. Take the opportunity to visually check the lid locks and the harnesses for any obvious sign of ...
...washer and remove the three screws securing the console's rear cover plate across the console's rear top edge. The console has six locking feet that secure it to the top cover. Gently rock the top of ...
...LOCK THE WASHER ONLY LOCKS IF YOU HOLD IN ON THE TOP OF THE DOOR Disconnect power then open the dispenser cover and remove the four screws securing the dispenser bezel to the top cover then lift the ...
Question about Washing Machines
...cover to access the door lock assembly. Disconnect the wiring harness and manually unlock the door. If none of these steps work, you may need to contact a professional appliance repair technician for ...
72 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions
