Whirlpool Duet 3.8 cu. ft. Front Load Washer "washer misses spin" Questions

...spin/drain cycle. The last two times Ive run my washer it has been making a banging/clunking sound on the spin cycle. Ive stopped it to redistribute the items (towels) yet it continued to make this ...

...washer went out of balance during the spin cycle Check the Vibration damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts ...

my washing mashin shows F35; First shows sud my washing mashin shows inletWhirl Check the drain line for kinks or obstructions first. Then check the pump. Remove the hoses from the pump and using a ...

load stops and flashes F-21 When washing a load the load stops and flashes F-21, it does the same thing for many loads. What does F-21 mean? F-21 is a code that indicates "long drain".Check the drain ...

suds....cycle will not complete. even with no suds....cycle will not complete. even with no detergent help Check the drain line for kinks or obstructions and check out the pump. It's not only if the ...

My Whirlpool Duet GHW1900 makes a lot of noise during the spin and rinse cycle Check the Vibration damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3.

...Also check the impeller on the pump, if any tines are missing the pump must be replaced. If all is good with the pump, re-install the drain filter and run the washer through a rinse and spin

my whirlpool duet front load won't run. I got an f- error code and when i went to run the drain cycle it sound like grinding coming from the pump? Now the drain cylce won't even run the machine just ...

F02 message but pump propellar doesn't spin totally around I took pump out and clean everything but should the pump propellar spin totally around or should it spin most of the way and then stop then ...

...washer, what do I do to fix it? Check the drain line for kinks or obstructions. You can take a flashlight, remove the hose from the pump and look into the suction port of the pump. Check for anything ...