Whirlpool Duet 3.8 cu. ft. Front Load Washer "start button working" Questions

...button working is the control locks button. Please advise/ help. Thanks! check all the wiring connections-ie pull them apart and put back together-computer stuff doesn't like/read partial ...

...button...not working flashed f & h fault codes...took bk panel off...checked water lines...ok pulled out pump..unscrewed cap...found pen inside... put to drain/spin cycle...time lights flash...pump ...

...start button, friend had a panel that fit....replaced it. now cant get the thing to turn on. all lights working, all buttons working, but light on washer cycle is flashing You might have blown a fuse ...

start..When i push the pause button and the control button at the same time all the light come on like it wants to work but the control lock light is still on and it wont start. if it is duet hold the

...Start" button The "Hold to Start" button is not working. It was finicky before; you had to push it just so to get it to work. now it doesn't. I'm afraid someone pushed it too hard in their ...

...start button which has the green light stuck on. The other buttons don't even make a noise when I press them. There is no read out on the front or lights on anywhere other than the start button which ...

...start button doesn't work, very loose, appears to be off track to engage The button actually fits through the panel to the control board. It could be the control board that is just loose. IF the ...

...I've tried holding down the start button, the pause button and the control on button and nothing is working.. Please help!!! Try unplugging it and see if it resets itself after a couple of

...button to start a load of wash it does nothing, when I let go it beeps like it would If i were pressing the pause button, the start and pause button are built into one button. I cant figure out any ...