Whirlpool Duet 3.8 cu. ft. Front Load Washer "reset end washing machines" Questions

reset I tried the end of cycle button and it worked!!!! Thanks so much! Thank for the help. i all most paided someone 14.00 to tell me to hold down the end control button. Thank you so much. I had the

...reset the control and to eliminate the possibility of an electronic glitch if pressing and holding the End of Cycle button does not work. Replace the control if unplugging and the pressing the End of ...

reset this? Press and hold down "end of cycle" button at right side of panel for 3 - 5 seconds. This is the child lock feature, do it again and the machine locks. Unplug for at least 2 hours . On mine

do? Press the end of cycle signal button for 3 seconds OR To reset press the DRAIN/SPIN button and hold it for 15 seconds. OR Press and hold the END OF CYCLE button for 15 seconds to reset the control

...reset the control and to eliminate the possibility of an electronic glitch if the End of Cycle button does not unlock it. Replace the control if unplugging and the End of Cycle button fails to unlock ...

at least 15 minutes to reset the central control unit if the control cannot be unlocked using the End of Cycle button. Let us know if the control cannot be unlocked even after the machine is unplugged

reset the control and make sure and eliminate the possibility of an electronic glitch if the End of Cycle button does not unlock it. Replace the control if unplugging and the End of Cycle button fails

controls locked button on and other cycles light but washer wont start and wash cycle blinks. is there a reset button? Power shd be on. Press the "end of cycle" button on the right side for 3 seconds.

END OF CYCLE button for 15 seconds to reset the control. OR Unplug washer Remove lower kick panel Reach up and locate bottom of door lock switch Grab the teardrop shaped tab Pull gently till yall hear

...the DRAIN/SPIN button and hold it for 15 seconds. OR Press and hold the END OF CYCLE button for 15 seconds to reset the control. OR Press options and select for 10 secs till LOC is no longer ...