Whirlpool Duet 3.8 cu. ft. Front Load Washer "cold water" Questions

Ad

Question about Whirlpool duet Washing Machines

2 Answers

...water not cold When I run the cold/cold cycle the wash cycle water is warm. The hoses are hooked up correctly and screens are clear. I turned off the hot water inlet to see if it would run with just ...

Ad

...hot/cold and drain because the rinse uses cold water and u may have a cold water issue with the water inlet valve, the water inlet valve cold coil may have gone bad. test it with a meter and ...

Ad

Question about Whirlpool duet Washing Machines

1 Answer

cold water supplies are turned on. Select a cold wash cycle and start the wash cycle, do you get cold water? Now select a hot wash cycle and start the wash cycle, do you get hot water? If you only get

Question about Whirlpool duet Washing Machines

1 Answer

cold water going to it. It will go for a while and then reads F-20. What do I do? he F20 error is a no water detected entering machine error and yes it is related to the hot water not being hooked up.

Question about Whirlpool duet Washing Machines

1 Answer

cold water in washer only hot water even when cold button is pressed Hi Barb. Try swapping the hoses on the hot and cold water taps. Try for a hot wash and then a cold wash. This will help confirm the

Question about Whirlpool duet Washing Machines

3 Answers

cold water supply lines to make sure machine gets enough water intake. If you do not have a hot water supply to the machine you can only run it with the cold temperature setting. This machine does not

Question about Whirlpool duet Washing Machines

1 Answer

cold water comes in when I put it on cold cycle Check the tap is turned on if not fix turn off taps, check the lint screen inside the hose end (tap connector end) is not blocked if not fix check cable

Question about Whirlpool duet Washing Machines

1 Answer

...cold water only hooked up. I only USE cold water setting. Why does F 20 keep appearing? Can I not only use the cold water? F20 means that the water has not reach the level in the time allowed by the ...

Question about Whirlpool duet Washing Machines

1 Answer

and 'F'. You must have water to both inlets. Even with cold/cold, Your washer will mix the water some. Detergent will not activate if your water is extremely cold as it comes straight from the ground

...cold/cold water, it starts to fill with cold but switches to hot water after a few seconds Sounds like you've got the hoses switched, and the cold water you're feeling is just what is in the ...

Not finding what you are looking for?
Washing Machines Logo

348 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...