Whirlpool LTE5243D Top Load Stacked Washer/Dryer "wont fabric softener" Questions

...fabric softener wont drain. Always water in there. Lameez SA Jan2014 Remove the dispenser draw and wash it all out. The most likely cause is that fabric softener has congealed and blocked the ...

...wont drain fabric soften dispenser wont drain; filled with water after wash Try using a long handled babies bottle brush to clean out the rear of the dispenser and the tube leading down into the ...

wont spin back and forth. it will fill up, make the sound of washing, but then it just spin dries. theres no "washing" taking place. make sure the agitator bolt is tight. open lid, remove plastic ring

...its your dispenser motor or your ccu board had 1 few mouths ago same prob only fabric wouldn't work was ccu board about 300.00 for part labor 152.00, buy service smart warranty from sears wont go ...

fabric softener wont drain REservoir Blocked. Fabric softeners are abit of a nuisance in many respects.. I would rather stop the machine and manually add it after the first spin. Why does everything ...

Why wont it take fabric softener? all other dispensers work except fabric softener it stays in tray even after thoroughly cleaning What kind of washing machine you have, top or front loader?

...wont take the fabric softener When I put the fabric softener in the machine every time the washing machine cycle leaves it behind. I have tried several cycles and they are all the same. Could you ...

...fabric softner reivore wont take in/ empty the fabric softner I had this problem also. I pulled the drawer out, then removed the softener assembly. (the blue piece) In the front there is a hole that ...

...open the lid an pour it in.. Or get one of those Downy fabric softener balls for dispensing they work great and you wont have to stand by the washer to try to time it right...Hope this helps GOOD ...

...fabric softener dispenser doesn't work at all (dispensing the softener). Also I have alot of mold on the door rubber and in the dispenser tray, any idea. You have low water pressure which wont reach ...