Whirlpool LTE5243D Top Load Stacked Washer/Dryer "hot cycle" Questions

...cycle of hot/cold mode with the hosed switched. If I have the hoses connected correctly, cold to cold and hot to hot, the cold water valve doesn't open and I get only hot water for wash and FH error ...

...hot/warm cycle works okay - cold cycle does not - when cold selected it does not sound like water even tries to fill but the cycle runs with no water - I removed the hose from the faucet and the cold ...

...entering during the warm cycle. The hot water cycle works, the cold cycle works. But for some reason the hot water does not enter on the warm cycle? What is wrong? sounds like faulty solonoid

...hot cycle...started as sporadic but is now continously warm on cold cycle. Is this something a DIYer can fix? It sounds like your water inlet valve (also known as a Mixing Valve on some washers) HOT ...

cycle with hot water and then it gets warm, but no where near cold. The washer is 5 years old and never had this problem before so any help would be appreciated!! It is normal for the machine to cycle

...Hot cycle which fills just like the warm cycle alternating input of hot and cold water to get a warm wash. I changed the water thermostat and saw no difference. Will this machine fill with only hot ...

...cycle. Wash hot and cold lights flash. Have to select the next cycle. Have already tried a brand new control board and that did not work. I would have thought it was the board too! does it beep when ...

...hot water cycle, some water (only cold) for warm cycle and no flow for hot water cycle. I do have pressure in my hot water line. Any ideas? Hot water solenoid valve on washer not working. Test ...

...hot? New Kenmore front loader only runs hot, clothes are steamy after selecting cold cycle wash? you got the pipes hooked up right? XD also check that the cycle you selected isn't a hot wash