Whirlpool Ultimate Care II LSQ9564J Top Load Washer "water overfils hose" Questions

...too low(must be 30 inches above the floor) or the water level switch is not detecting water pressure. Remove the hose from the switch and blow the sand out of the line. Empty the water and

...hose may have come off the water level switch. you need to acess the control panel, check the water level switch, there is a small pressure hose that slides on the small stem toward the lower rear of ...

...Hose: The pressure switch, also known as the water level switch, communicates with the control board to stop the water flow when the desired level is reached. Check the pressure hose connected to the ...

...on floor. My Question-water fill switch ? Could be a faulty water level switch ,or blocked pressure chamber hose leading to switch, or a sticking water inlet valve, question of elmination I'm

water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lock condition in order for "FL" to be displayed. With an

...water on the floor? It was leaking. I reattached a hose about 6mm were it was coming from. Now, it overfills and pours water over the floor. it sounds like your water level clip is broken and needs ...

...Water leaking Drain hose disconnected from waste pipe. Reconnect the drain hose to the waste pipe. Supply inlet hose not properly connected. Ensure the inlet hose is connected securely. Other leaks. ...

...went bad. Which tells the water inlet valve when to shut off and the machine to start operating. 2) The water inlet valve has failed. This comes from the water hose and fills the washing

...water hose is letting water in when it shouldn't, but also the machine is not telling it to stop when the machine is overfilled. I tested both inlet valves with a multimeter and, electrically, they ...

...water level switch and pressure chamber, the small hose leading to the pressure switch can get blocked and cause the washer to overfill. To check the hose, remove the lower rear panel of washer, at ...