...washer,remove the cold water hose from the back of the washer,stick it in the sink or inside the washer and turn it on,if it comes out strong then you have a bad water valve on the washer,if it comes ...
...washer a cold or hot water fill? The water supply I have to the washer is a cold water line only. At present I have a y piece connection to supply to both hot and cold water inlets. Are they both ...
...washer to just cold wash and then hot washif you get nothing on the cold and cold water when set to hot they are probably reversed. Typically if the auto-temp control is broken you will only get hot ...
Question about Whirlpool Washing Machines
...cold. The washer is probably 1.5 to 2 years old. first make sure the hoses aren't reversed hot on cold or cold on hot next turn off cold water remove the hose from the washer and check to see if the ...
...washer to a later cycle cold water comes out just fine. So it almost seems like its the timer knob any ideas? Thanks Hello Chad Welcome Sounds like the cold water knob or switch is not switching and ...
...washer...cold water settings i have the maytag ensignia washer...none of the cold water settings are working...i have cold water coming through to my laundry tub sitting next to the washer...if i set ...
...washer in warm/cold cycle the washer turns off the cold water and only fills with hot. it sounds like your mixture valve is faulty on the cold water side. that is the valve where you screw the hose ...
...washer dryers are cold fill only now. If it has 2 connectors, then you must still connect to cold using a Y piece to make the final connection to washer. Hope this helps. Please rate my solution. ...
...washer hot/cold now reversed Maytag performa washer hot and cold valves are hooked up correctly, but washer is giving hot water on cold setting and cold water on hot setting. Just happened suddenly ...
Question about Whirlpool Washing Machines
...Washer - no cold water on the cold/cold or warm/cold wash cycle settings, nothing on cold/cold, and only hot on warm/cold?? Replaced water inlet valve and the temperature control switch, still have ...
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions
