...Spin cycle - water will not drain out Ultra Care ll, Quiet Wash 2 Model LSQ9010PW5 - A new lid switch was installed, Drain was checked for plug up - clear Try self clean function or use calgon to ...
Question about Whirlpool Washing Machines
...Quiet Wash II (Agitate but nothing else.) My washer will agitate but won't drain, rinse or spin. Just sits full of water. Only sound, is the timer ticking. you have a faulty lid switch you will need ...
Quiet 1 machine ( Whirlpool) and it's 4 yrs old. Appreciate your help please. Many thanks This problem is usually attributed to a lid switch malfunction. The lid switch is mounted under the washer top
Question about Whirlpool Washing Machines
...quiet wash 1-- after the basin fills with water, the washer stops working, the agitation motor does not engage. I tried turning off the circuit breaker, a re-boot, without success. The washer ...
...Quiet Wash Plus unit, Model GST9675JQ2 washing machine. It stooped after filling for rinse and did not spin. An hour later tried to activate spin and it was OK. In the next load it did not and will ...
Question about Roper Washing Machines
...QUIET AND FULL OF WATER. IT FILLS BUT WHEN IT GETS TO THE DRAIN AND SPIN, STOPS. AT FIRST IT CLICKS FOR A COUPLE OF SECONDS AND STOPS. IS THIS THE TIMER THAT IS BROKE? It may be a bad lid switch. ...
...2/ Drum bearing also gone. (noise) 3/ 3 slides that located underneath the triangle frame need replaced. Usually this is a load unbalanced problem. By making sure the clothes are evenly distributed ...
...clothes. I have the kenmore Quiet pak II . Only 3 1/2 yrs old. It is fixed but is now no longer quiet, I can hear this darn theing 2 floors up and never heard it even on the 1st floor b4. Good
...Quiet Pak washing machine. The machine will fill the tank, run in the washing (agitating) mode, but will not pump the water out of the tank. I was not present at the time, but some water did run onto ...
...Quiet Wash washer. I'm trying to replace the lid switch. Help Steve take putty knife and release 2clips in front between top and front panel about 2 to 3 inches from both edges push knife forward in ...
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions