Question about Whirlpool Washing Machines
...lid switch (part no 3949238) at low price? Would appreciate help on where to lid switch (part no 3949238, Kenmore 70 series) at low price Any appliance parts store has them about $35.00. Try EBay for ...
Lid Switch for Washing Machine How can I install a Kenmore Washer Lid Switch 3949238? pop trims from ends of control panel remove screws from bottom of control panel under trims slide control panel ...
Question about Whirlpool Washing Machines
Lid Switch Lock Assembly on Top Load Washer Repair... Washer Lid Switch Part Number 3949238 GUARANTEED FIT from Sears PartsDirect Kenmore 80 Series Washer Lid Switch Repair won drain or spin Whirlpool
Question about Washing Machines
...lid switch on my washer model #110.20432991 part #3949238? You will need a 5/16 nut driver, phillips and flathead screwdriver. Remove endcaps on rh and lh side of console by pulling from the top ...
...lid switch,if it's bad this will happen,you can set the timer to spin and push it in,open the lid and push down on the lid switch with a screw driver,also when you push down on the lid switch and ...
lid switch. I've noticed that there are a large number of posts about these lid switches going bad. Seems like this is a manufacturing defect. Is there a recall on these or possibly a free replacement
lid switch. http://www.fixya.com/support/r9939128-whirlpool_kenmore_estate_kitchen_aid The part number for the lid switch on your model is 3949238 it could be purchased from your local appliance parts
...spining Its filled with water and will wash but will not drain or spin Misti, usually no spin, no drain is a broken lid switch. part #3949238. See if the switch is busted off from the screws. ...
...lid switch for kenmore 110.27802690 The following link explains step-by-step how to replace a lid switch on this model Kenmore: http://www.fixya.com/support/r385198-replacing_lid_switch If you have ...
lid switch mount broke, held in place by two screws in my Kenmore washer (Model 110.22332100), causing the machine to stop during the rinse cycle. The machine would not spin to drain the water. I used
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions
