Whirlpool Ultimate Care II LSQ9564J Top Load Washer "gear" Questions

...is this? Same issue here with the Water Path Control Unit of Miele W 4840. No teeth broken on any gear, and the motor was trying to turn the gears, but the red gear was stuck. Found heavy buildup ...

isn't connected to the motor. Spins semi-freely by hand, with a rough motion and noise Your unit is gear driven and is contained in a mechanism enclosure.The roughness your feeling when turning it are

...pulleys will move freely by hand but seem to lock up mechanically.will not spin could be a stuck gear box. this gear box could have a mechanical problem on the spin cycle. it usually turns the ...

MY WASHER IS MAKEING A LOUD SOUND DURING FAST SPIN OUT most likely the spider gear is broke,you can check the shocks but usually it's the spider gear.detergent eats at the gear in the back,if you ...

Pedestal dining table won't close all the way. The gears and teeth seem to lock about an inch away from closing. We had the same problem and figured out that the gears had "slipped" over time and ...

...yr old impatient boy Hi! On all of thses tiny co-axil helicopters, it is common for either the tiny gear on a motor shaft, or the larger gear on the rod for the main blade to slide a bit so that the ...

...it ? !!! Cheers, Steve. Inner spin bowl rises up when water level is high & disengages a clutch gear. When water drains out bowl settles back down and gear engages. Error 40 is saying that the ...

...the spin cycle does not spin, sometimes it spins. It makes a clicking noise during gentle cycle The gears maybe going out. Sometimes it is able to engage in the other direction which the spin, ...

kenmore washer gear box oil wish oil for the gear box ? 90wt gear oil or very thick engine oil 50wt or higher dont use a mixed wt like 20-50

...in one direction and ratchets properly. I have pulled the agitator off to reveal the bottom drive gear. I pulled the bolt out and the gear off. It seems like the inner spindle/gear are not