Whirlpool Ultimate Care II LSQ9564J Top Load Washer "admiral washer wont spin" Questions

...admiral washer model atw4475tq0 is having trouble spinning and i also have a admiral dryer atw4475tq0 that is making a thumping sound my admiral washer model atw4475tq0 is having trouble spinning it ...

admiral washer model AED4475tq0 is having trouble spinning it will some times spin good but other times it wont when it wont spin i have to open the lid and turn the tub till it stops and then it will

admiral washer model atw4475tq0 is having trouble spinning it will some times spin good but other times it wont when it wont spin i have to open the lid and turn the tub till it stops and then it will

admiral washer wont spin the clothes dry Probably not getting upto full spin speed, drum may wobble more than usual? Change the motor drive belt below the machine, tilt the machine 45 degree backwards

washer aggatates but wont move to spin cycle , drains but wont spin. Motor engages. Thanks for choosing FixYa and welcome. You need to check the motor drive. It controls the spinning and the agitation

...ADMIRAL WASHER WONT SPIN FAST ENOUGH..IT DOES SPIN BUT WHEN IT STOPS THE CLOTHES ARE STILL DRIPPING WET Sounds like a whirlpool or inglis type belt drive with a loose belt or bad basketdrive[clutch]. ...

...admiral model# LNC6760B71 wont spin out. makes a buzzing sound You need to check if there is power to the motor. If so the motor is defective.If not, the timer may be the problem. There should be a ...

...Admiral washer will fill with water and agitate, but when it comes time to spin it wont drain or spin. I dont hear the motor or any other noise. I opened the lid and put a screwdriver to press the ...

admiral top load washer wont spin machine wont spin after first spin and rinse Are you saying the machine completely quits? Or it still drains and all just not spinning after the first time?

admiral washer wont spin washer does everything normally but will not spin. Sounds like it is spinning but doesn't. Could something be in the drum blocking it and how can I check? look at the holes in