...checks at the drive motor connector acros Pins 1 to 2, 2 to 3, and 1 to 3 should all read about 6 ohms. I hope this helps you. PS I believe the tachometer is a physically attached to the drive
...ps test-all LEDs on lh side failed in test--replace control panel per test. Did Keypad and LED test--all LEDs work. Did touchpad operating test. All OK until extend spin test-failed. Next item cycle ...
...3.05 in change! PS be prepared for a lot of water if it won't drain on its own! Thanks Are the 3 screws behind the door itself? And are they like star shaped heads, not 4 way? My husband is gone on a ...
...3. Plug 8: Door Lock Main Switch (4-wire connector, 3rd from the Right along the front of the CCU) - Readings across test points 1& 2, and 4&5 should read 0 ohms with the door in the LOCKED position. ...
...3-pin connector (any combo of two should be 7-15 ohms). I was able to order the part from an online electronics supplier (www.mcminone.com, P/N 6501KW2002A, description is "sensor assembly") and ...
1,725 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,373 Questions
429 Questions