...runs again all the time and cannot finish any washing cycle. It is 8 years old. Thank you, Alex I had the same problem. The washer control board has an intermittent failure. If you unplug power for ...
Question about Kenmore Washing Machines
...it I didn't get home till 4 hours later at which time I plugged it back in and waited 1 hour lights were still on and still didn't run. Try disconnecting from the power for 10 minutes to reset
power. I found that if i wait about 5 mins and turn it back on , it runs again....for about 10 secs then quits again. If i leave the switch (knob) out to ''Start'' , it will run for 10 secs then quit
power. Don't replace this dude (item 20) $86 till you know the soap problem has been remedied. What other pearls of wisdom do I have? Let's see Oh yeah the pump, if it has junk in it then these errors
...power( brand does not matter I tell most people to buy cheap stuff at walmart) start machine let it run till you see powder disolve then stop washer and add 1 cup bleach. let unit go through complete ...
...power to it, check fuse box and everything else that is running of same. Pretty much exactly what guest above me said. I have a lsq8543jq1 also, was stopping after agitation. At first thought it was ...
...till about 30 mins later it wouldnt drain all the way but was running as if it was. I kept getting a 1nt error code and when i unplug the washer it keeps giving me the same code. its a kenmore elite ...
Question about Bosch Washing Machines
...cleaning does not work, replace) all the above done with the power unplugged and water inlets unplugged , of course Need to DRAIN it first. It wont open till you run the drain cycle after wash
power , but every time I set a program to run , it throws a up door lock warning light and will not start . I have powered it down , etc ... , and tried most iof the standard stuff but to no avail ...
1,725 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,373 Questions
429 Questions