Whirlpool Calypso GVW9959K Top Load Washer "knob turning water coming faucet" Questions

...knob on will washer fill ? if water starts to fill then change washer temp if washer has this. if water comes out on all settings water valve is fine. Check the water both hot and cold that it is ...

faucet. Both hot water and cold water knobs are typing but it still Dripps Turn your water off at the main line. remove both faucet stems, take them to Lowes or Home Depot and get a repair kit. Follow

...water. 2. Did you turn on the machine on?. This is required specially for heavy duty 10kg Whirlpool industrial grade washing machines.. 3. If the two above didnt work. Try rotating the knob to NORMAL ...

Are the water inlet valve screens clogged? Are both the hot and cold water faucets turned on? Is ... Washer Manual and knob https://www.manualslib.com/manual/77205/Inglis-Washer.html?page=10#manual .

...turning level knob will get it to work . In any case, remove console and find the large switch with the small tube attached to it. If that tube gets kinked or clogged the machine won't stop ...

...knob is pulled but it will spin just not fill or agitate sounds to me like either the water faucet at the wall is shut off or their is some sort of restriction to the pipes not allowing the washer to ...

water from the tub,then spins.... I talked to a technician to fix it but nothing happened...He can't fix it... Im from a province,i guess the tech's here havn't encountered a washing machine like this

...water level knob on the control panel. you will need to get access to inside the control panel and remove the clear tube conected to the water level switch. (( just pull it off easy )) now try the ...

knob and won't run until the water in the machine has filled to the selected level. If the knob doesn't line up properly with the graphics on the control panel, you can try to troubleshoot the washing

...turning the machine on, remove a cover. On some washers, there are two screws on the bottom L & R front corners that take the front panel loose. Once the screws are removed, the front cover is ...