...washing machine not filling with water Probably your inlet pipe is clogged, or not open sufficiently. Plug off the wall, turn off the inlet pipe, disconnect tube to check carefully if anything is ...
...Washing machine I have a LG12225FD washing machine - recently there has been water leaking from underneath. Pulled the whole machine out and disconnected the cold inlet pipe to put ptfe tape on. ...
Question about Samsung Washing Machines
...washing machine does not fill with water. Replaced hot and cold water inlet valves and water pressure switch. Error 4E. Please help. Checked water tap, water pressure water inlet pipes, inlet pipes ...
...washing machine. The pressure seems to be real bad. So far I have taken off the hoses from the pipe that inlets to the washing machine. When I do this the pressure seems fine but as soon as I plug it ...
Question about AEG Washing Machines
...washing machine during a cycle. It is not happening when emptying. This hole is surrounded by rubber. It is not the inlet pipe or outlet pipe hole. It is inline with both of these though. Any help ...
...washing machine to clean the water inlet. I unplugged the pipe, took things apart, cleaned and put them back together the best i could. I replaced the pipe inlet and switched on the faucet, the water ...
Question about Creda Washing Machines
Washing Machine fills slowly how to change inlet valve Hi My washing machine fills slowly when switched off. I think its the hot water inlet valve I have already turned off the water pipes, taken the ...
Question about Creda Washing Machines
washing machine, when the machine is rinsing/spinning the water comes back up the inlet pipe and out through the powder drawer all over the floor. Is there a non - r The water shoots back up the inlet
...Washing machine: Servis Caress 1500 "A"] I am not to sure if this answers your question but I think you are asking which way the hot and cold hoses connect to the wasing machine? if this is the case ...
Question about Washing Machines
...washing machine does not fill Check mains water pressure Check inlet hoses for kinks Check inlet filter Check water inlet valve Pressure switch fault Wiring fault E11 Not hot fill detected - washing ...
39 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions