...water will come out when pipe laying on floor. If your washer does not drain you need to check this parts. Inspect the drain hose for kinks Test the timer control Test the lid switch(some ...
...motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work ...
Question about Maytag Washing Machines
...water by removing or disconnecting the waste hose and laying it on the ground in a tray. It may take a few minutes to empty but it will save a small flood. 4. Proceed by checking the drain hose for ...
motor run but it doesn't spin. The belt looks fine. What are other potential problems? hi there the first thing ill tell you is that the washer needs to drain water before it can spin there are only a
...water by removing or disconnecting the waste hose and laying it on the ground in a tray. It may take a few minutes to empty but it will save a small flood. 4. Proceed by checking the drain hose for ...
Question about Whirlpool Washing Machines
...water in the hose run out. If the washer does fine thru the agitation cycle (the washing), that means the motor is OK and the coupler is OK. It would not agitate unless both are OK. (and don't listen ...
...you will see a large and black hose between drum and pump motor. When you remove it, you will see that there is something that blocks water running. thank you for using fixya,rate my answer, ...
...motor turns in both directions. iIn one direction the washer tub is locked and the tranny agitates. The water pumps out and the tub spins in the other direction. If that pump is locked up or the hose ...
...water by removing or disconnecting the waste hose and laying it on the ground in a tray. 3. Proceed by checking the drain hose for proper connection and kinks and make sure that it is not blocked. 4. ...
...water not going out you need to replace the drain pump of your unit.lay down the unit check the small motor that connecting to drain line remove the screw and remember the exactly position of the ...
2,460 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
1,413 Questions
1,373 Questions
429 Questions